Vaxis has released a new Vaxis ATOM 500 SDI Wireless Video Transceiver. This version is similar to the original Vaxis ATOM 500 but adds SDI connectivity.
The device can stream video up to 1080p at 60 frames per second to a distance of 500 feet over line-of-sight with an 80ms delay. The units can be powered via USB-C or NPF batteries.
The Vaxis ATOM 500 SDI Wireless Video Transmitter
As the name suggests, the Vaxis ATOM 500 SDI has a maximum limit of 500 feet (about 152 meters) on the same line of sight. Vaxis says the system has a response time of less than 80ms (0.08 seconds). With a 60fps signal it can reach almost four frames. In an interfering environment, the reach is reduced and the delay can reach 120ms (0.12 seconds, up to seven frames at 60 fps).Its specifications can be summarized as follows:
• Transmission range up to 500 ° line-of-sight• OLED screen
• SDI and HDMI inputs on TX, SDI and HDMI outputs on RX
• A dedicated iOS app where up to three iPhones or iPads can view the image at once
• Compact antenna design
• Optional battery mounting plates
• Support USB-C power input
• Future firmware upgrades via USB
• Smart fan
Video formats supported by the Vaxis ATOM 500 SDI
The video formats accepted by the device are:For HDMI, the following video formats are available:
• 720P @ 50 / 60Hz
• 1280 * 1024 at 60Hz
• 1080i @ 50/60 Hz
• 1080P @ 24/25/30/50/60 Hz
As for SDI, the following video formats are available:
• 720P @ 50 / 60Hz
• 1080I@50/59.94/60 Hz
• 1080P@23.98/24/25/29.97/30/50/59.94/60 Hz
• 1080PSF23.98 / 24 // 25 / 29.97 / 30Hz
Energy consumption
As for power, the Vaxis ATOM 500 SDI accepts 5V DC power (power consumption is less than 6.5W). It can be powered with either a USB-C cable or the built-in NPF battery. And Vaxis says it has re-worked the battery slot - now there's a stainless steel spring clip to hold the battery firmly in place and prevent it from accidentally falling out.Just like the original Vaxis ATOM 500, the antenna is internal. The device supports 13 channels and passcode protection. Vaxis says the audio and video are 100% syncronized with this system. There is an image preset / latency preset to choose between image quality and response time.
Vaxis Vision mobile app
The new device supports monitoring via the Vaxis Vision app. To facilitate communication with the phone, the device can display a QR code. Currently, the app is only available for iOS, Android version soon according to Vaxis.Price and availability in the market
The price of the Vaxis ATOM 500 SDI will be $ 459
Post a Comment